Is a Profurl NC25 too small for the yankee jib on a WS28?

<< First  < Prev   1   2   Next >  Last >> 
  • November 12, 2012 6:02 AM
    Message # 1135303
    Deleted user
    I found a deal on a Profurl NC25 and not sure if this one is too small.

    From all the data it looks the right size, but I recall in Bud's manual he recommends the next size up?

    If not the Profurl NC25, then I was going with the Alado.
    Last modified: November 13, 2012 4:47 PM | Deleted user
  • November 12, 2012 10:01 AM
    Reply # 1135535 on 1135303
    I think so. The NC32 is barely big enough for the bigger jibs.
  • November 12, 2012 4:52 PM
    Reply # 1135919 on 1135303

    Sean,

     

    I use an NC42 for the headstay.  It is a good fit.  The NC32 is a good fit for the staysail.

    Good luck,     Dave

  • November 12, 2012 5:13 PM
    Reply # 1135931 on 1135303
    I use an NC32 for the headstay, but in order to fit enough line for the bigger headsails ~300 sq ft I have to use 1/4" line for the furling drum. Trying to pull that line by hand in a blow is very hard. I have routed the line so that I can use the sheet winch if I have to.
    Last modified: November 13, 2012 6:53 AM | Anonymous member
  • November 13, 2012 7:37 AM
    Reply # 1136330 on 1135303
    Deleted user
    So looks like this deal is a no go.

    I think I am back to going with the Alado unit.  Should I get the A2 or A3?

    http://www.aladous.com
  • November 13, 2012 2:00 PM
    Reply # 1136626 on 1135303
    Are you guys talking about a W32 or W28?
  • November 13, 2012 2:29 PM
    Reply # 1136646 on 1135303
    I'm talking about a W32...so is Dave I think
  • November 13, 2012 4:46 PM
    Reply # 1136726 on 1135303
    Deleted user
    This is a Westsail 28 thread!
  • November 13, 2012 5:14 PM
    Reply # 1136767 on 1136726
    Anonymous
    Sean Steinberg wrote:This is a Westsail 28 thread!

    I don't know, sounds a lot like a W32 thread to me.  ;) 
  • November 13, 2012 5:47 PM
    Reply # 1136800 on 1135303
<< First  < Prev   1   2   Next >  Last >>