FOREPEAK

  • May 25, 2011 8:03 AM
    Message # 601116
    Deleted user

    The forepeak in my WS 32 consisted of 2-2x4 ledgers and a sheet of plywood. I want to start on the re-constuction but I lack the measurements for the type of forepeak that is shown in the manual.

    The measurements needed are: 1) The distance from the head bulkhead to the anchor locker bulkhead. 2) The length and height of the port and starboard cabinet face frames. 3) The location of face frame attachment to the forepeak cabin sole.

    Thanks for any help.

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

  • May 25, 2011 9:30 AM
    Reply # 601188 on 601116
    Greg - are you aware of the manual that Bill Shaw has on his web site:

  • May 25, 2011 5:41 PM
    Reply # 601640 on 601116
    Deleted user

    Gary--Thanks for the link but I have the original 1973 manual that came with my boat and also the manual from Galena (sic). What would be perfect would be the original templates that came with the boat.

    The interiors shown by # 93 and # 94 have different elevations (33 1/2" on on side and 40" in on the other) there is a revision noted on one of the drawings so which is the correct elevation, also what is length of the cabinet face frames and how does it attach to the cabin sole, all these questions would be easier to answer if the dawings were to scale.But since their not here I am.

    Thnks again

Powered by Wild Apricot Membership Software