Upper cabinets measurement (chart table / galley)

<< First  < Prev   1   2   Next >  Last >> 
  • July 24, 2012 11:42 PM
    Message # 1018974
    Anonymous
    Hello everyone , I am finishing my upper cabinets chart table and galley but don't have the exact measurements just wondering if anyone would have these which would make my job look so much better Very new to this all I have 1975 WS 32 
     
  • July 24, 2012 11:45 PM
    Reply # 1018975 on 1018974
    Anonymous
    Ps it would make much easier as well ! And thanks for any help you could give me !
  • July 25, 2012 1:53 PM
    Reply # 1019558 on 1018974
    Deleted user
    If you know what parts you need I may have templates. Nick
  • August 03, 2012 7:11 AM
    Reply # 1037822 on 1018974
    Deleted user

    Nick,

    Do you have templates for the starboard side settee and seaberth? Mine was partially cut out and I want to rebuild them.

  • August 03, 2012 11:58 AM
    Reply # 1038038 on 1018974
    Deleted user
    I should have them, give me a list of the parts ie. E7 etc and I will check, also there is a list of the templates I have some where on this forum, I will find it and let you know.
  • August 03, 2012 2:06 PM
    Reply # 1038125 on 1018974
    Deleted user

    Nick,

    I think I found the sheet which calls out the templates. I need F2,5,7,8 &9.

    Ray, I also found a sheet with the upper cabinet. Does this help?

    Let me know if you can't see the attached drawings.

    https://picasaweb.google.com/lh/photo/ef0vMWN5-FWSVfNkwO7yVNMTjNZETYmyPJy0liipFm0?feat=directlink

    https://picasaweb.google.com/lh/photo/th2ibyZGz-4ZCs2NC5dMedMTjNZETYmyPJy0liipFm0?feat=directlink

    Last modified: August 03, 2012 2:07 PM | Deleted user
  • August 05, 2012 4:03 PM
    Reply # 1039197 on 1018974
    Deleted user
    Sorry no f series
  • August 05, 2012 6:36 PM
    Reply # 1039294 on 1018974
    Deleted user
    No problem, thanks for looking.
  • August 06, 2012 1:12 PM
    Reply # 1040210 on 1018974
    Anonymous
    Sorry for the slow response ! And yes thank you so much! This great!
  • August 06, 2012 1:13 PM
    Reply # 1040211 on 1018974
    Anonymous
    Thank you again James!
<< First  < Prev   1   2   Next >  Last >>